Governance · Quality · Sustainability · Product Compliance

MERT DÖKÜM Certifications and Compliance

Q: How can a MERT DÖKÜM certificate be verified?

Open the original PDF and use the certificate number, QR code or issuing-body verification link. Certificate cards also show the current validity date.

Review current management-system certifications, international product certifications, Turkish product-conformity certificates and national tender qualifications issued to MERT DÖKÜM.

Controlled compliance information

Standards supporting responsible infrastructure manufacturing

MERT DÖKÜM applies documented quality, environmental, occupational health and safety, production-control and product-conformity requirements across its cast-iron, sheet-metal, polymer concrete drainage and separator product operations.

The register below presents each document with its issuing organization, applicable standard, certificate number, scope and validity period.

Quality governance

ISO 9001 supports controlled processes, traceability and continual improvement.

Environmental management

ISO 14001 supports structured environmental responsibilities and operational controls.

Workplace safety

ISO 45001 supports occupational health and safety risk management.

Product conformity

BSI, VIK and TSE documents cover defined product families and certificate scopes.

Current certificate register

MERT DÖKÜM certificates and compliance documents

The certificates below are grouped according to their governance purpose and official scope. Select a certificate to open its original PDF document.

Management System Certifications 3 certificates

Management-system certificates supporting quality, environmental responsibility and occupational health and safety governance.

Quality Management ISO 9001 2015 Certified by Kiwa

Valid

ISO 9001:2015

Quality Management System Certificate

Issued by: Kiwa Türkiye
Certificate number: K-0229839 / 1
Current issue: 1 July 2026
Valid until: 30 June 2029

Quality management system covering the production of ductile and grey cast-iron parts, sheet-metal access covers, grease separators and polymer concrete drainage channels. The official certificate records exclusion of Clause 8.3, Design and Development.

View certificate PDF

Environmental Management ISO 14001 2015 Certified by Kiwa

Valid

ISO 14001:2015

Environmental Management System Certificate

Issued by: Kiwa Türkiye
Certificate number: K-0229840 / 1
Current issue: 1 July 2026
Valid until: 30 June 2029

Environmental management system covering the production of ductile and grey cast-iron parts, sheet-metal access covers, grease separators and polymer concrete drainage channels.

View certificate PDF

Occupational Health & Safety ISO 45001 2018 Certified by Kiwa

Valid

ISO 45001:2018

Occupational Health and Safety Management System Certificate

Issued by: Kiwa Türkiye
Certificate number: K-0229841 / 1
Current issue: 1 July 2026
Valid until: 30 June 2029

Occupational health and safety management system covering the production of ductile and grey cast-iron parts, sheet-metal access covers, grease separators and polymer concrete drainage channels.

View certificate PDF

International Product Certifications 2 certificates

Independent product-certification documents covering specified MERT DÖKÜM cast-iron manhole tops, gully tops and gratings identified in their official annexes.

Product Certification BSI Kitemark
BS EN 124-2

Valid

BS EN 124-2:2015

BSI Kitemark – Cast-Iron Manhole and Gully Tops

Issued by: BSI Assurance UK Limited
Certificate number: KM 733410
Latest issue: 4 March 2025
Valid until: 19 January 2027

BS EN 124-2:2015 Kitemark certification for selected Class D400 cast-iron manhole and gully top models identified in the three-page certificate and product schedule.

View certificate PDF

Constancy of Performance VIK-HR HRN EN 124-1
HRN EN 124-2

Valid

HRN EN 124-1:2015 · HRN EN 124-2:2015

Certificate of Constancy of Performance

Issued by: VIK-HR d.o.o.
Certificate number: 10/09-ZGP-22/05 (E)
Current issue: 27 February 2026
Valid until: 1 March 2027

Certificate of constancy of performance for the cast-iron manhole tops, gully tops and gratings listed in the certificate annex under HRN EN 124-1:2015 and HRN EN 124-2:2015.

View certificate PDF

Turkish Product Conformity Certificates 6 certificates

Turkish Standards Institution certificates covering defined manhole covers, gully tops, floor and roof gullies, drainage channels and grease separators.

Product Conformity TSE TS EN 124-1
TS EN 124-2

Valid

TS EN 124-1 · TS EN 124-2

Cast-Iron Manhole and Gully Tops Certificate

Issued by: Turkish Standards Institution
Certificate number: 012424-TSE-02/06
Current issue: 4 May 2026
Valid until: 9 May 2027

TSE conformity certification for specified cast-iron manhole tops and gully tops in the B125, C250, D400, E600 and F900 classes stated in the original certificate.

View certificate PDF Verify with TSE

Product Conformity TSE TS EN 124-3

Valid

TS EN 124-3:2015

Stainless-Steel Manhole Top Sets Certificate

Issued by: Turkish Standards Institution
Certificate number: 0304331-TSE-05/01
Current issue: 1 July 2026
Valid until: 22 March 2027

TSE conformity certification for specified stainless-steel manhole top sets in classes A15, B125, C250 and D400.

View certificate PDF Verify with TSE

Product Conformity TSE TS EN 1253-1

Renewal due

TS EN 1253-1:2015

Trapped Floor Gullies Certificate

This certificate expires on 15 October 2026. Renewal planning should be in progress.

Issued by: Turkish Standards Institution
Certificate number: 0304331-TSE-02/04
Current issue: 1 July 2026
Valid until: 15 October 2026

TSE conformity certification for specified trapped floor gullies in the H1.5, K3, L15, R50 and M125 classes.

View certificate PDF Verify with TSE

Product Conformity TSE TS EN 1253-2

Renewal due

TS EN 1253-2:2015

Roof and Floor Gullies without Trap Certificate

This certificate expires on 15 October 2026. Renewal planning should be in progress.

Issued by: Turkish Standards Institution
Certificate number: 0304331-TSE-03/04
Current issue: 1 July 2026
Valid until: 15 October 2026

TSE conformity certification for specified roof and floor gullies without traps in the H1.5, K3, L15, R50 and M125 classes.

View certificate PDF Verify with TSE

Drainage Channels TSE TS EN 1433

Valid

TS EN 1433

Polymer Concrete Drainage Channels Certificate

Issued by: Turkish Standards Institution
Certificate number: 086293-TSE-04/01
Current issue: 14 May 2026
Valid until: 20 May 2027

TSE conformity certification for Type M synthetic-resin-bound drainage channels in groups C250, D400 and F900.

View certificate PDF Verify with TSE

Grease Separators TSE TS EN 1825-1

Valid

TS EN 1825-1

Stainless-Steel Grease Separators Certificate

Issued by: Turkish Standards Institution
Certificate number: 0304331-TSE-06/02
Current issue: 14 May 2026
Valid until: 20 May 2027

TSE conformity certification for specified combined-type stainless-steel grease separators in nominal sizes 1, 2, 3, 4, 7 and 10.

View certificate PDF Verify with TSE

National and Tender Qualifications 1 document

National manufacturing and tender-related documentation applicable to specified locally manufactured MERT DÖKÜM products.

National Qualification DOMESTIC
GOODS 54.46% Local Content

Valid

Domestic Goods Certificate

Cast-Iron Gratings and Covers

Issued through: Elazığ Chamber of Commerce and Industry
Certificate number: 2026124701665
Issue date: 26 March 2026
Valid until: 26 March 2027
Local contribution: 54.46%

Domestic Goods Certificate for cast-iron gratings and covers manufactured by the MERT DÖKÜM Elazığ branch. This document is a national tender qualification and is presented separately from international management system certificates.

View document PDF

Certificate-scope notice: Certificate coverage is limited to the legal entities, manufacturing locations, management systems, product groups, models, dimensions and load classes stated in each original document. Publication on this page does not extend certification beyond its official scope. The issuing organization's records remain authoritative.

Compliance information

Frequently asked questions

What management-system certifications does MERT DÖKÜM hold?

MERT DÖKÜM currently publishes ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 certificates issued by Kiwa Türkiye.

Which product standards are represented?

Published product documents include BS EN 124, HRN EN 124, TS EN 124, TS EN 1253, TS EN 1433 and TS EN 1825-1 within their stated certificate scopes.

How can a MERT DÖKÜM certificate be verified?

Open the original PDF and use its certificate number, QR code or issuing-body verification link. Each certificate card also displays its current validity date.